Bud
Mar 6, 2023
Updated: Apr 7
To be able to get full functionality from the Third Reality Smart button featured in the following video on my YouTube Channel.
You must first install the SmartThings Edge Driver for the Third Reality Zigbee Smart Button before installing the device to the ST App.
Here is the Driver Channel Invitation Link and instructions for installing the Third Reality Edge Driver:
1. Click on the following Third Reality Channel Invitation link Third Reality Driver Channel Invitation.
2. Tap on "Enroll", then tap on "Available Drivers"
3. Select "Zigbee Button" driver from the list of drivers.
4. Click on "Install" to install the "Zigbee Button" driver to your hub.
5. Add your Third Reality Smart Button to your SmartThings app by tapping the "+" and select "Scan for nearby devices.
6. Once the button is discovered, open the Third Reality Button device screen. Tap on the three dots in the upper right hand corner of the SmartThings app. Tap on "Driver" in the dropdown list. Confirm that the Third Reality "Zigbee Button" was assigned as the device driver.
7. Once you have confirmed that the "Zigbee Button" driver has been assigned to your Third Reality Smart Button then you are ready to setup the button functions. Please reference my YouTube Video for more detail about setup and features.
4. Click the "Install" Button to download the "Zigbee Button" custom edge driver to your SmartThings or Aeotec Hub.
5. Open the SmartThings app, and opt to scan for nearby devices to add your button to SmartThings.
6. Once your device is discovered, open the Third Reality Button device screen. Tap on the three dots in the upper right hand corner of the SmartThings app. Tap on "Driver" in the dropdown list. Confirm that the Third Reality "Zigbee Button" was assigned as the device driver.
If you found this article helpful, please consider buying me a coffee? You may do so by tapping on the PayPal-Me button below.
Find many more SmartThings compatible smart devices on my Amazon Store!